Serial Programming: Introduction and OSI Network Model-- RS-232 Wiring and Connections-- Typical RS232 Hardware Configuration-- 8250 UART-- DOS-- MAX232 Driver/Receiver Family-- TAPI Communications In Windows-- Linux and Unix-- Java-- Hayes-compatible Modems and AT Commands-- Universal Serial Bus (USB)-- Forming Data Packets-- Error Correction Methods-- Two Way Communication-- Packet Recovery Methods-- Serial Data Networks-- Practical Application Development-- IP Over Serial Connections

• 1What is USB?
  • 1.2Class Codes
    • 1.2.1USB signaling
  • 1.3USB connectors
  • 1.4Power supply

PC-controlled programming via the E1 emulator, E20 emulator, E2 emulator, E2 emulator Lite, a serial or USB connection Interoperation with other software The efficiency of work can be improved by, for example, writing data to many boards consecutively and retaining logs of the written data in files.

1. Serial Flash Programming of C2000™ Microcontrollers 1 Introduction As applications become more and more complex, the need to fix bugs, add features, and otherwise modify.
2. Usb spi flash programmer free download. FreeRTOS & libraries for AVR ATmega AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost.

What is USB?[edit]

USB stands for 'Universal Serial Bus'. It is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was intended to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has also become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports.

USB flash drives are memory devices that are inserted and powered by USB ports. They store information and data that needs to be easily accessed. These devices are portable and convenient for people on the go. USB ports are a common necessity for students as well as business employees or personnel. In addition to convenience, they range in storage capacities from 1GB to 64 GB, so end users are able to store as much information as small computers.

USB connects several devices to a host controller through a chain of hubs. In USB terminology, devices are referred to as functions, because each individual physical device may actually host several functions, such as a webcam with a built-in microphone. The hubs are special-purpose devices that are not officially considered functions. There always exists one hub known as the root hub, which is attached directly to the host controller.

These devices/functions (and hubs) have associated pipes (logical channels). The pipes are synonymous to byte streams such as in the pipelines of Unix. Pipes are connections from the host controller to a logical entity on the device named an endpoint. The term endpoint is also occasionally used to refer to the entire pipe.

These endpoints (and their respective pipes) are numbered 0-15 in each direction, so a device/function can have up to 32 active pipes, 16 into the host controller and 16 out of the controller.

Each endpoint can transfer data in one direction only, either into or out of the device/function, so each pipe is uni-directional. Endpoint 0 is however reserved for the bus management in both directions and thus takes up two of the 32 endpoints — all USB devices are required to implement endpoint 0, so there is always an inward and an outward pipe numbered 0 on any given device.

In these pipes, data is transferred in packets of varying length. Each pipe has a maximum packet length, typically ${\displaystyle 2^n}$ bytes, so a USB packet will often contain something on the order of 8, 16, 32, 64, 128, 256 up to 512 bytes.

The pipes are also divided into four different categories by way of their transfer type:

• control transfers - typically used for short, simple commands to the device, and a status response, used e.g. by the bus control pipe number 0
• isochronous transfers - at some guaranteed speed (often but not necessarily as fast as possible) but with possible data loss, e.g. realtime audio or video
• interrupt transfers - devices that need guaranteed quick responses (bounded latency), e.g. pointing devices and keyboards
• bulk transfers - large sporadic transfers using all remaining available bandwidth (but with no guarantees on throughput or latency), e.g. file transfers

When a device (function) or hub is attached to the host controller through any hub on the bus, it is given a unique 7 bit address on the bus by the host controller.

The host controller then polls the bus for traffic, usually in a round-robin fashion, so no device can transfer any data on the bus without explicit request from the host controller. The interrupt transfers on corresponding endpoints do not actually interrupt any traffic on the bus: they are just scheduled to be queried more often and in between any other large transfers, thus 'interrupt traffic' on a USB bus is really only high-priority traffic.

To access an endpoint, a hierarchical configuration must be obtained. The device connected to the bus has one (and only one) device descriptor which in turn has one or more configuration descriptors. These configurations often correspond to states, e.g. active vs. low power mode. Each configuration descriptor in turn has one or more interface descriptors, which describe certain aspects of the device, so that it may be used for different purposes: for example, a camera may have both audio and video interfaces. These interface descriptors in turn have one default interface setting and possibly more alternate interface settings which in turn have endpoint descriptors, as outlined above. An endpoint may however be reused among several interfaces and alternate interface settings.

Host controllers[edit]

The hardware that contains the host controller and the root hub has an interface geared toward the programmer which is called Host Controller Device (HCD) and is defined by the hardware implementer. In practice, these are hardware registers (ports) in the computer.

At version 1.0 and 1.1 there were two competing HCD implementations. Compaq's Open Host Controller Interface (OHCI) was adopted as the standard by the USB-IF. However, Intel subsequently created a specification they called the Universal Host Controller Interface (UHCI) and insisted other implementers pay to license and implement UHCI. VIA Technologies licensed the UHCI standard from Intel; all other chipset implementers use OHCI. The main difference between OHCI and UHCI is the fact that UHCI is more software-driven than OHCI is, making UHCI slightly more processor-intensive but cheaper to implement. The dueling implementations forced operating system vendors and hardware vendors to develop and test on both implementations which increased cost. During the design phase of USB 2.0 the USB-IF insisted on only one implementation. The USB 2.0 HCD implementation is called the Extended Host Controller Interface (EHCI). Only EHCI can support hi-speed transfers. Each EHCI controller contains four virtual HCD implementations to support Full Speed and Low Speed devices. The virtual HCD on Intel and VIA EHCI controllers are UHCI. All other vendors use virtual OHCI controllers.

Class Codes[edit]

The device descriptor of a USB device has a signature that tells what kind of device has been attached to the bus. This signature consists of class code, subclass code and protocol fields. Together, these identify what operating system driver should be used to communicate with the device. Additionally, each USB device interface descriptor contains the same signature fields. The interface signature allows multiple operating system drivers to simultaneously communicate with a single USB device (for example USB device with audio and video interfaces) and they also allow multiple instances of the same driver to communicate with separate interfaces of the same USB device (for example USB ethernet adapter with multiple ethernet ports)

Devices that attach to the bus can be full-custom devices requiring a full-custom device driver to be used, or may belong to a device class. These classes define an expected behavior in terms of device and interface descriptors so that the same device driver may be used for any device that claims to be a member of a certain class. An operating system is supposed to implement all device classes so as to provide generic drivers for any USB device.

Device class codes are decided upon by the Device Working Group of the USB Implementers Forum. If the class applies to the entire device, the class code is assigned to the bDeviceClass field of the device descriptor, and if it is to be set for a single interface on a device, it is assigned to the bInterfaceClass field of the interface descriptor. It is also possible that multiple interfaces of the device are grouped by using an Interface Association Descriptor, in which case the class code is assigned to bFunctionClass fields of the descriptor. Class code is a single byte, so a maximum of 254 different device classes are possible (values 0x00 and 0xFF are reserved). If bDeviceClass is set to 0x00, the operating system will look at bFunctionClass for Interface Association Descriptors and bInterfaceClass for each interface to determine the device class. Each class also optionally supports a SubClass and Protocol subdefinition. These can be used as the main device classes are continuously revised.

The most used class codes (grouped by assigned class ID) are:^[1]

0x00 - Unspecified Class (Device Descriptor)

The USB device has no assigned class code. The class codes of the device interface descriptors should be used to identify which drivers are supported by the device.

0x01 - Audio Class (Interface Descriptor)

The interface follows USB audio device class specification. This class code is used by sound card-like devices.

0x02 - CDC / Communication Device Class (Device or Interface Descriptor)

USB communications device class ('CDC'), used for modems, network cards, ISDN connections, Fax.

0x03 - HID Class / Human Interface Device Class (Interface Descriptor)

USB human interface device class ('HID'), keyboards, mice, etc.

0x05 - Physical Device Class (Interface Descriptor)

?

0x06 - Still Imaging Class (Interface Descriptor)

Still image capture device class, identical to the Picture Transfer Protocol as used across USB

0x07 - Printer Class (Interface Descriptor)

USB printer device class, printer-like devices.

0x08 - Mass Storage Class (Interface Descriptor)

USB mass storage device class used for flash drives, portable hard drives, memory card readers, digital cameras, digital audio players etc. This device class presents the device as a block device (almost always used to store a file system).

0x09 - Hub (Device Descriptor)

USB hubs.

0x0A - CDC Data / Communication Device Class Data (Interface Descriptor)

CDC-Data (Communications Class Device).

0x0B - Smart Card Class (Interface Descriptor)

Smart card readers.

0x0D - Content Security Class (Interface Descriptor)

Content Security.

0x0E - Video Class (Interface Descriptor)

USB video device class, webcam-like devices, motion image capture devices.

0xDC - Diagnostics Device Class (Device or Interface Descriptor)

Class for diagnostics devices. This class has a single subclass for USB 2.0 compliance testing devices.

0xE0 - Wireless Controller Class (Device or Interface Descriptor)

Wireless controllers, for example Bluetooth dongles. This class code is usually used only in interface descriptors, only bluetooth subclass allows use in device descriptors.

0xEF - Miscellaneous Class (Device or Interface Descriptor)

?

0xFE - Application Specific Class (Interface Descriptor)

?

0xFF - Vendor Specific Class (Device or Interface Descriptor)

Custom device class - used to establish that a device or interface does not support any standard device class and requires custom drivers.

USB signaling[edit]

Mnemonic: Victor Dashes Across Ground-Zero (Vbus , - , + , GND , Shield/Blank)

USB signals are transmitted on a twisted pair of data cables, labeled D+ and D−. These collectively use half-duplex differential signaling to combat the effects of electromagnetic noise on longer lines. D+ and D− usually operate together; they are not separate simplex connections. Transmitted signal levels are 0.0–0.3 volts for low and 2.8–3.6 volts for high.

Transfer modes[edit]

USB supports four transfer modes:

• Control
• Interrupt
• Bulk
• Isochronous

Transfer speed[edit]

USB supports three data rates:

• A Low Speed rate of up to 1.5 Mbit/s (187.5 kB/s) that is mostly used for Human Interface Devices (HID) such as keyboards, mice, and joysticks.
• A Full Speed rate of up to 12 Mbit/s (1.5 [MB/s). Full Speed was the fastest rate before the USB 2.0 specification and many devices fall back to Full Speed. Full Speed devices divide the USB bandwidth between them in a first-come first-served basis and it is not uncommon to run out of bandwidth with several isochronous devices. All USB Hubs support Full Speed.
• A Hi-Speed rate of up to 480 Mbit/s (60 MB/s).

Hubs, even Hi-Speed hubs, serving a number of non-hi-speed devices, are likely to divide up a total bandwidth of 12 Mbit/s for such devices, which will slow them down unless the hub has transaction translator for each port. ^[3]

Though Hi-Speed devices are commonly referred to as 'USB 2.0' and advertised as 'up to 480 Mbit/s', not all USB 2.0 devices are Hi-Speed. Hi-speed devices typically only operate at half of the full theoretical (60 MB/s) data throughput rate. The maximum rate currently (2006) attained with real devices is about half, 30 MB/s.^[4] Most hi-speed USB devices typically operate at much slower speeds, often about 3 MB/s overall, sometimes up to 10-20 MB/s. The USB-IF certifies devices and provides licenses to use special marketing logos for either 'Basic-Speed' (low and full) or Hi-Speed after passing a compliance test and paying a licensing fee. All devices are tested according to the latest spec, so recently-compliant Low Speed devices are also 2.0.

Hi-Speed devices are intended to fall back to the slower data rate of Full Speed when plugged into a Full Speed hub. Hi-Speed hubs have a special function called the Transaction Translator that segregates Full Speed and Low Speed bus traffic from Hi-Speed traffic. The Transaction Translator in a Hi-Speed hub (or possibly each port depending on the electrical design) will function as a completely separate Full Speed bus to Full Speed and Low Speed devices attached to it. This segregation is for bandwidth only; bus rules about power and hub depth still apply.

A hub will have one or more Transaction Translators and there is no standard way to determine the number of transaction translators a hub may have. All low and full speed devices connected to one transaction translator will share the low/full speed bandwidth. This means that hubs can have dramatically different performance depending upon the number of transaction translators and the devices plugged into their ports. e.g. a hi-speed 7 port hub with only 1 transaction translator with 7 low/full speed devices plugged in, will act no differently than a USB 1.1 hub and all devices compete for the same low/full speed bandwidth. If the hub were to have a transaction translator for each of the seven ports, then each device would have all the full/low speed bandwidth available to it and would only compete for the hi-speed bandwidth, which is much greater.^[5]

Data encoding[edit]

Usb Eeprom And Serial Flash Programmer

The USB standard uses the NRZI system to encode data, and uses bit stuffing for logic 1 transmission six bits long (put logic 0 after six bits of logic 1; the receiver ignores a 0 following six logic 1). Moreover, receiving a block of seven consecutive bits of logic 1 will be signaled as a bit stuffing error at the receiver.The NRZI (non-return to zero, inverted) encoding method does not change the signal for transmission of a logic 1, but it inverts the signal level for transmission of each logic 0.

Mini-USB signaling[edit]

Most of the pins of a Mini-USB connector are the same as those in a standard USB connector, except pin 4. Pin 4 is called 'ID' and, in the Mini-A plug, is connected to ground, but in the Mini-B plug it is not connected. This causes a device supporting USB On-The-Go (with a Mini-AB socket) to initially act as host when connected to a USB Mini-A plug (the 'A' end of a Mini-A– Mini-B cable). The Mini-A connector also has an additional piece of plastic inside to prevent insertion into a slave-only (B-only) device.

USB connectors[edit]

Connector types[edit]

There are several types of USB connectors, and some have been added as the specification has progressed.From the original USB specification:

• Standard-A plug
• Standard-A receptacle
• Standard-B plug
• Standard-B receptacle

Added in the first engineering change noticed to the USB 2.0 specification:

• Mini-B plug
• Mini-B receptacle

Added in the Universal Serial Bus Micro-USB Cables and Connectors Specification:

• Micro-A plug (white)
• Micro-AB receptacle (gray)
• Micro-B plug (black)
• Micro-B receptacle (black)

Adapters, also from the Universal Serial Bus Micro-USB Cables and Connectors Specification (Note that no other adapters are allowed.):

• Standard-A receptacle to Micro-A plug

• 'Micro-series USB technology will replace Mini-series USB in OTG products' [1] 'Beaverton, OR, 2007-01-04 -- The USB Implementers Forum, Inc. (USB-IF) today announced the completion of the Micro-USB specification, a new connector technology that will replace many of the Mini-series plugs and receptacles currently used in portable products.' The Micro-USB plug is rated for 10,000 connect-disconnect cycles. It is about half the height of the mini-USB connector in widespread use today but features a similar width.

Cables and connectors[edit]

Cables have only plugs, and hosts and devices have only receptacles. Hosts have type-A receptacles; devices, if they have receptacles, have type-B. Type-A plugs only mate with type-A receptacles, and type-B with type-B.

The On-the-Go supplement allows a product to be either host or device, with a Micro-AB receptacle that accepts either a Micro-A plug or a Micro-B plug. Micro-A, Micro-B, and Micro-AB connectors are identified easily by color. The plastic inside Micro-A plugs and receptacles is always white, that in Micro-B connectors black, and that in Micro-AB receptacles grey.

There is a limited set of cables allowed by the USB specification. Cables fall into two categories — 'detachable' and 'captive'. All allowed USB cables have one type-A plug, either Standard-A or Micro-A. The other end of a 'captive' cable is either not removable or it has a custom connector on the device end. If the cable is 'detachable', the other end of the cable must have a type-B plug. There also exists a special adapter cable that has micro-A plug and standard-A receptacle.

Captive USB cable types:

• Standard-A plug to device.
  This cable may have a custom connector on the device end.
• Micro-A plug to device.
  This cable is not intended to be removed by the end user of the device.

Detachable USB cable types:

• Standard-A plug to Standard-B plug.
  This is the most popular cable for connecting USB devices to host.
• Standard-A plug to Mini-B plug.
  Used to connect older mobile devices to host.
• Standard-A plug to Micro-B plug.
  Used to connect newer mobile devices to host.
• Micro-A plug to Micro-B plug.
  Used to connect mobile devices to each other.
• Micro-A plug to Standard-A receptacle.
  This is a special adapter cable that is allowed to be at most 150 mm long. It is needed in order to allow mobile devices to act as USB hosts for devices which are not using Micro-USB connectors.

Any cable with a receptacle (except the special case above) or with two 'A' or two 'B' connectors is, by definition, not USB.^[6] However, many cable manufacturers make and sell USB-compatible (yet not strictly conforming) extension cables with a Standard-A plug on one end and Standard-A receptacle on the other end. Note that these non-conforming extension cables should not be mixed with conforming cables that contain a small bus-powered hub. Cables with two type A or even two type B plugs are available from more specialist suppliers.

Note that only 'full-speed' and 'hi-speed' devices use detachable cables. Compliant 'Low-speed' devices only use captive cables, because the low-speed specification does not allow for the electrical characteristics of standard detachable USB cables.

The Mini-B, Micro-A, Micro-B, and Micro-AB connectors are used for smaller devices such as PDAs, mobile phones or digital cameras. The Standard-A plug is approximately 4 by 12 mm, the Standard-B approximately 7 by 8 mm, and the Micro-A and Micro-B plugs approximately 2 by 7 mm.

The connectors which the USB committee specified were designed to support a number of USB's underlying goals, and to reflect lessons learned from the varied menagerie of connectors then in service. In particular:

• The connectors are designed to be robust. Many previous connector designs were fragile, with pins or other delicate components prone to bending or breaking, even with the application of only very modest force. The electrical contacts in a USB connector are protected by an adjacent plastic tongue, and the entire connecting assembly is further protected by an enclosing metal sheath. As a result USB connectors can safely be handled, inserted, and removed, even by a small child. The encasing sheath and the tough moulded plug body mean that a connector can be dropped, stepped upon, even crushed or struck, all without damage; a considerable degree of force is needed to significantly damage a USB connector.
• It is difficult to incorrectly attach a USB connector. Connectors cannot be plugged-in upside down, and it is clear from the appearance and kinesthetic sensation of making a connection when the plug and socket are correctly mated. However, it is not obvious at a glance to the inexperienced user (or to a user without sight of the installation) which way round a connector goes, so it is often necessary to try both ways.
• The connectors are particularly cheap to manufacture.
• The connectors enforce the directed topology of a USB network. USB does not support cyclical networks, so the connectors from incompatible USB devices are themselves incompatible. Unlike other communications systems (e.g. RJ-45 cabling) gender-changers are almost never used, making it difficult to create a cyclic USB network.
• A moderate insertion/removal force is specified. USB cables and small USB devices are held in place by the gripping force from the receptacle (without the need for the screws, clips, or thumbturns other connectors require). The force needed to make or break a connection is modest, allowing connections to be made in awkward circumstances or by those with motor disabilities.
• The connector construction always ensures that the external sheath on the plug contacts with its counterpart in the receptacle before the four connectors within are connected. This sheath is typically connected to the system ground, allowing otherwise damaging static charges to be safely discharged by this route (rather than via delicate electronic components). This means of enclosure also means that there is a (moderate) degree of protection from electromagnetic interference afforded to the USB signal while it travels through the mated connector pair (this is the only location when the otherwise twisted data pair must travel a distance in parallel). In addition, the power and common connections are made after the system ground but before the data connections. This type of staged make-break timing allows for safe hot-swapping and has long been common practice in the design of connectors in the aerospace industry.
• The USB standard specifies relatively low tolerances for compliant USB connectors, intending to minimize incompatibilities in connectors produced by different vendors (a goal that has been very successfully achieved). Unlike most other connector standards, the USB spec also defines limits to the size of a connecting device in the area around its plug. This was done to avoid circumstances where a device complied with the connector specification but its large size blocked adjacent ports. Compliant devices must either fit within the size restrictions or support a compliant extension cable which does.

However, the physical layer is changed in some examples. For example, the IBM UltraPort is a proprietary USB connector located on the top of IBM's laptop LCDs. It uses a different mechanical connector while preserving the USB signaling and protocol. Other manufacturers of small items also developed their own small form factor connector, and a wide variety of these have appeared. For specification purposes, these devices were treated as having a captive cable.

An extension to USB called USB On-The-Go allows a single port to act as either a host or a device - chosen by which end of the cable plugs into the socket on the unit. Even after the cable is hooked up and the units are talking, the two units may 'swap' ends under program control. This facility targets units such as PDAs where the USB link might connect to a PC's host port as a device in one instance, yet connect as a host itself to a keyboard and mouse device in another instance. USB On-The-Go has therefore defined two small form factor connectors, the Mini-A and Mini-B, and a universal socket (Mini-AB), which should stop the proliferation of proprietary designs.

Usb Eeprom Programmer

Wireless USB is a standard being developed to extend the USB standard while maintaining backwards compatibility with USB 1.1 and USB 2.0 on the protocol level.

Serial Flash Programmer

The maximum length of a USB cable is 5 meters; greater lengths require hubs [2]. USB Connections can be extended to 50 m over CAT5 or up to 10 km over fiber by using special USB Extender products developed by various manufacturers.

Power supply[edit]

Standard[edit]

The USB specification provides a 5 V (volts) supply on a single wire from which connected USB devices may draw power. The specification provides for no more than 5.25 V and no less than 4.35 V between the +ve and -ve bus power lines.

Initially, a device is only allowed to draw 100 mA. It may request more current from the upstream device in units of 100 mA up to a maximum of 500 mA. In practice, most ports will deliver the full 500 mA or more before shutting down power, even if the device hasn't requested it or even identified itself. If a (compliant) device requires more power than is available, then it cannot operate until the user changes the network (either by rearranging USB connections or by adding external power) to supply the power required.

If a USB device sees that the data lines of the USB bus have been idle for 3 milliseconds, the device must go into suspend state. Suspended devices are allowed to draw 500 μA. If the device was configured to use more than 100 mA of current, before the device was suspended, and the device was configured as a remote wakeup source, the device is allowed to draw 2.5 mA while suspended. The current limits during suspend are one second averages.

Note that On-The-Go and Battery Charging Specification both add new powering modes to the USB specification.

If a bus-powered hub is used, the devices downstream may only use a total of four units — 400 mA — of current. This limits compliant bus-powered hubs to 4 ports, among other things. Equipment requiring more than 500 mA, hubs with more than 4 ports and hubs with downstream devices using more than four 100 mA units total must provide their own power. The host operating system typically keeps track of the power requirements of the USB network and may warn the computer's operator when a given segment requires more power than is available.

For further reading[edit]

• http://www.usb.org/ is the website of USB Implementors Forum, Inc., a non-profit corporation founded by the companies that developed the USB specification.
• The USB 3.0 specification is the official definition of the USB standard. Chapter 9 covers USB devices.
• http://www.beyondlogic.org/index.html#USB practical information about some of the USB microcontrollers and ICs available from several companies.
  • The USB in a Nutshell guide is very helpful, covering...
  • USB descriptors (although it neglects to mention that multi-byte fields are little-endian)
• USB Designer Links http://homepage.hispeed.ch/ibhdoran/usb_link.html lots of information about USB chips from lots of different companies.
• Developer's Guide to USB, with Bus Analyser examples, includes great information about the low-level protocol
• A USB Protocol Analyser is essential if you are developing firmware for a USB device
• Linux USB http://linux-usb.org/
• Sycard Technology http://sycard.com/usb.html sells tools for USB development.
• 'USB Chips: USB Host and Device Controller Chips' edited by Jan Axelson
• The Java RxTx class (explained in Serial Programming:Serial Java) can also communicate with some USB devices[3].
• Embedded Systems/Particular Microprocessors briefly mentions microcontrollers that can talk USB
• the 'Open USB FXS' blog describes an open-source project using a Microchip 18F2550 talking USB

Serial Nand Flash

References[edit]

1. ↑USB Class Codes
2. ↑Universal Serial Bus Specification Revision 2.0 — 6.5.2 USB Connector Termination Data]
3. ↑Multi-TT Hub Goes Head-to-Head With Single-TT at Tom's Hardware Guide
4. ↑http://www.barefeats.com/usb2.html
5. ↑http://www.tomshardware.com/2003/09/09/usb_technology/index.html
6. ↑see http://www.usb.org/developers/whitepapers/cablew~1.pdf and http://www.usb.org/developers/docs/ecn1.pdf

Serial Programming: Introduction and OSI Network Model-- RS-232 Wiring and Connections-- Typical RS232 Hardware Configuration-- 8250 UART-- DOS-- MAX232 Driver/Receiver Family-- TAPI Communications In Windows-- Linux and Unix-- Java-- Hayes-compatible Modems and AT Commands-- Universal Serial Bus (USB)-- Forming Data Packets-- Error Correction Methods-- Two Way Communication-- Packet Recovery Methods-- Serial Data Networks-- Practical Application Development-- IP Over Serial Connections

Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Shop by Brand

Great prices on popular products

Compare at price is the price for the same product offered in the online market

Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Great prices on popular products

• USB Programmer Ch341a Series Burner Chip 24 EEPROM Bios Writer 25 SPI Flash

  (12)Total Ratings 12,

  Free Shipping

Save on Microcontrollers & Programmers

Trending price is based on prices over last 90 days.

Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Save on Microcontrollers & Programmers

Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Best Selling

• USA Ship Mega 2560 R3 Board Atmega2560-16au Ch340g USB Cable for Arduino KK

  (48)Total Ratings 48,
• St-link V2 Programming Unit Mini Stm8 Stm32 Emulator Downloader

  (16)Total Ratings 16,
• Stm32f103c8t6 Arm Stm32 Minimum System Development Board Module for Arduino

  (41)Total Ratings 41,
• 2x CPU Processors Atmel Attiny85-20pu 8-bit 20mhz MCU

  (31)Total Ratings 31,
• Xgecu High Speed Programmer USB Tl866ii Plus EEPROM Flash 8051 MCU Pic AVR Gal

  (3)Total Ratings 3,
• Auto ECU Chip Tuning Prg108 Gq-4x V4 Gq-4x4 Programmer Adp-019 Psop44 Adapter V2

  (4)Total Ratings 4,
• GQ BRAND Prg-120 Gq-5x NAND Flash High Speed Programmer Tsop48 Mcumall Canada

  (1)Total Ratings 1,
• 1pcs Stm32f103c8t6 Arm Stm32 Minimum System Development Board Module Arduino

  (18)Total Ratings 18,

• USB Programmer CH341A Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash NEW

  With CH341A chip. Note: ESMT SST Series 25 can be read only, can not be written due to CH341A characteristic. 2526Series devices support list: AMIC. CH341A ESMT SST?. Support 24EEPROM and 25 SPI flash 8pin/16pin chip.

  From China

  Free shipping

  Brand: Unbranded

  1,761 sold

• USBASP USBISP AVR Programmer Adapter 10 Pin Cable USB ATMEGA8 ATMEGA128 Arduino

  AVR serials：. With power and programming indicator light. 51 serials：. AT90CAN32、AT90CAN64、AT90CAN128、AT90PWM2(B)、AT90PWM3(B) and so on.

  Top Rated Plus

  $0.29 shipping

  From ChinaBrand: Unbranded

• ST-Link V2 Programming Unit mini STM8 STM32 Emulator Downloader M89 New

  6, a number of classic STM8 information (including a large number of source code examples and learning experience). 1、 support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked!

  Top Rated Plus

  $0.65 shipping

  From ChinaBrand: Unbranded

• PICkit3 PIC KIT3 PICkit2 KIT2 Debugger Programmer Emulator PIC Controller New

  From China

  Free shipping

  Brand: Unbranded

• EEPROM BIOS USB Programmer CH341A + SOIC8 Clip + 1.8V Adapter +SOIC8 Adapter Kit

  1 x SOIC8 SOP8 Flash Chip IC Test Clip socket adapter. and will try our best to resolve the issues.

  From China

  Trending at $10.98

  Brand: Unbranded

• ST-Link V2 Programming Unit mini STM8 STM32 Emulator Downloader

  6, a number of classic STM8 information (including a large number of source code examples and learning experience). 1、 support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked!

  From China

  Free shipping

  Brand: Unbranded

  176 sold

• SOP8 Test Clip EEPROM 93CXX 25CXX 24CXX CH341A Flash BIOS USB Programmer Module

  From China

  Free shipping

  Brand: Unbranded

• Soic8 Sop8 Flash Chip Ic Test Clips Socket Adpter Bios/24/25/93 Programmer

  It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming. This item for sop8 chip ,such as 25c, 24c, 93c and so on. TEST CLIP, SOIC 8/ SOP8. Connector type: Test Clip / Pin format: SOIC / SOP.

  From China

  Free shipping

  Brand: Unbranded

• Programmer TL866II PLUS for ICSP SPI in-circuit program/ more than 15000+ ICs

  TL866II PLUS English manual download link TL866II PLUS Latest software download link: (will be updated in the future). TL866II PLUS Support Device List It supports multiprogramming mode (up to four ).

  From China

  Free shipping

• STM32 STM32F103C8T6 Cortex-M3 Minimum System Development Core Board For Arduino

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• XGecu TL866II Programmer PLUS for SPI Flash NAND EPROM MCU AVR+13 adapter+clip

  TL866II PLUS English manual download link TL866II PLUS Latest software download link: (will be updated in the future). TL866II PLUS Support Device List It supports multiprogramming mode (up to four ).

  From China

  Free shipping

• STK500 USBASP AVR Programmer Adapter Board USB 10Pin to 6Pin Adapter For Arduino

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• Programmer AVR Minimum System Board ATMEGA16 ATmega32 + USB ISP USBasp For ATMEL

  Not only is it quite compact, but the design is really elegant. AVR Series Standard ISP download interface. With 500mA over-current protection self-recovery fuse, and complete protection of expensive computer motherboard.

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• microcontrollers PICkit2 PIC KIT2 debugger programmer for PIC24 PIC32 PIC dsPIC

  1 x PIC kit2 the main body 1 X USB Cable. 1, the electrical performance : 100% to the original ; software features : 100% up to the original ( 2 shelves ). 4, high-quality transparent new material injection, nice.

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• 1pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module Arduino

  Model: STM32F103C8T6. Size:5.3cm x 2.2cm.Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. 4-16MHz crystal. 2.0-3.6V power, I/O. We will leave it for everyone that leaves it for us.

  From China

  Free shipping

  Brand: Unbranded

  From China

  Was: Previous Price$39.99

• CANADUINO Stand-Alone Arduino Atmel Microchip AVR Atmega Boot Loader Programmer

  From Canada

  Was: Previous Price$11.37

  355 sold

• Pro Micro ATMEGA32U4 3.3V/5V 8/16MHz USB Controller Board Bootloader for Arduino

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• SOIC8 SOP8 Flash Chip IC Test Clips Socket Adpter BIOS/24/25/93 Programmer

  This item for sop8 chip ,such as 25 , 24c , 93c and so on. TEST CLIP, SOIC 8/ SOP8. Connector type: Test Clip.

  Top Rated Plus

  $0.29 shipping

  From ChinaBrand: Unbranded

• FlashcatUSB xPort Programmer - Darkwire Edition V1.1 NOR SLC NAND Flash SPI I2C

  From Australia

  $16.46 shipping

• Mini Altera Usb Blaster Cable For CPLD FPGA NIOS JTAG Altera Programmer GM

  CPLD：MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II. Flex 10k、flex 10ke、flex 10ka、flex 6000、flex 8000、epcs1、epcs4、epcs16、epcs64epc1、epc4、epc8、epc16.

  From China

  Free shipping

• INTEL D87C51 CHMOS Single-Chip 8-bit Microcontroller Intel CDIP-40

  Part Number: D87C51.

  From Australia

  $2.06 shipping

  Brand: Intel

• Microcontroller PIC16F84A-04I/PIC16F877A-I/16F648A 16F819 16F627A 16F873A US

  Top Rated Plus

  Free shipping

  From ChinaBrand: Unbranded

• FlashcatUSB Classic V2.2 Memory Programmer - Adapters EEPROM BIOS Motherboard

  From Australia

  $16.46 shipping

• SOFi SP16-F Eeprom Programmer - 24 25 93 95 BR90 SPI ISP Flash BIOS Offline 1.7V

  Exclusive ISP download interface, 10PIN color ISP download line for on-board chip programming (such as the computer motherboard BIOS that leads to the SPI interface). -25 Series SPI FLASH chip type detection.

  From Australia

  $19.20 shipping

• Microchip PICKit 4 Programmer Debugger PG164140, Genuine Microchip, From SYDNEY

  The MPLAB PICkit 4 is connected to the design engineer’s computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. Note: The PICKit 4 is compatible with MPLAB X IDE version 4.15.

  From Australia

  Trending at $54.19

  Brand: Microchip

  Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Top Rated

  • 2x CPU Processors Atmel Attiny85-20pu 8-bit 20mhz MCU

    (31)Total Ratings 31,

    100% agree - Would recommend
  • Smallest Sim800l GPRS GSM Module Card Board Quad-band Onboard Antenna

    (20)Total Ratings 20,

    100% agree - Would recommend
  • 1pcs Stm32f103c8t6 Arm Stm32 Minimum System Development Board Module Arduino

    (18)Total Ratings 18,

    100% agree - Would recommend
  • PICKIT3 Microchip Programmer W/ USB Cable Wires Pic Kit 3

    (18)Total Ratings 18,

    94% agree - Would recommend
  • St-link V2 Programming Unit Mini Stm8 Stm32 Emulator Downloader

    (16)Total Ratings 16,

    100% agree - Would recommend
  • Pickit3 Pic Kit3 Debugger Programmer Emulator Pic Controller Development Board

    (15)Total Ratings 15,

    100% agree - Would recommend
  • Ublox Neo-6m GPS Module Aircraft Flight Controller for Arduino MWC IMU Apm2

    (14)Total Ratings 14,

    100% agree - Durable
  • Ramps 1.4 Mega2560 A4988 12864 LCD Controller 3d Printer Kit for Arduino RepRap

    (11)Total Ratings 11,

  Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Hot This Week

  Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Sponsored Listings

  Got one to sell?

  Get it in front of 160+ million buyers.

  Showing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} - Make an Offer

  • USB Programmer CH341A Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash NEW

    Free shipping

    Make Offer - USB Programmer CH341A Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash NEW
  • STM32F103C8T6 Minimum System Developmen Board Module Core Learning For Arduino

    Free shipping

    Make Offer - STM32F103C8T6 Minimum System Developmen Board Module Core Learning For Arduino
  • ST-Link V2 Programming Unit mini STM8 STM32 Emulator Downloader

    Free shipping

    Make Offer - ST-Link V2 Programming Unit mini STM8 STM32 Emulator Downloader
  • USB ISP USBASP Programmer for ATMEL 51 AVR Programmer

    Free shipping

    Make Offer - USB ISP USBASP Programmer for ATMEL 51 AVR Programmer
  • 1pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module Arduino

    Free shipping

    Make Offer - 1pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module Arduino
  • INTEL D87C51 CHMOS Single-Chip 8-bit Microcontroller Intel CDIP-40

    +$2.06 shipping

    Make Offer - INTEL D87C51 CHMOS Single-Chip 8-bit Microcontroller Intel CDIP-40
  • P80C31SBPN - 80C31 - NXP Microcontroller, 8-Bit, 8051 CPU, 16MHz (DIP-40)

    +$3.09 shipping

    Make Offer - P80C31SBPN - 80C31 - NXP Microcontroller, 8-Bit, 8051 CPU, 16MHz (DIP-40)
  • ST-Link V2 Programming Unit mini STC8 STC32 Emulator Downloader NwB1ISW GVUS

    Free shipping

    Make Offer - ST-Link V2 Programming Unit mini STC8 STC32 Emulator Downloader NwB1ISW GVUS
  • EEPROM BIOS usb programmer CH341A + SOIC8 clip+1.8V adapter + SOIC8 adapteRCUS

    Free shipping

    Make Offer - EEPROM BIOS usb programmer CH341A + SOIC8 clip+1.8V adapter + SOIC8 adapteRCUS
  • 24C08WP - ST Microelectronics Serial EEPROM (DIP-8)

    +$3.09 shipping

    Make Offer - 24C08WP - ST Microelectronics Serial EEPROM (DIP-8)
  • $8.00

    Make Offer - 5PCS ATMEGA16A-AU 8-bit Microcontroller
  • Hot Sell 10PCS CD4050BE CD4O5OBE CD4050 CD4050B DIP-16 Controller IC

    Free shipping

    Make Offer - Hot Sell 10PCS CD4050BE CD4O5OBE CD4050 CD4050B DIP-16 Controller IC

  Tell us what you think - opens in new window or tab